Tips For Replacing a Window Handle
It is easy to change your window handle from the convenience of your own home. Follow these guidelines to ensure a smooth and beautiful finish.
Remove the screws from your uPVC handle to expose the screws. Make sure you measure the spindle in order to make sure you are getting the correct size replacement.
1. Take a measurement of the Spindle Length
When replacing a window handle, it's important to get the size of the spindle correctly. It could affect the tightness or looseness of the handle, as well as whether the handle locks correctly into the window frame. The spindle is a metal shaft that connects the handle to the lock inside the frame of the window. The spindle could be a standard 8mm cross-section in the industry or the earlier 9mm versions. The modern industry standard is 8mm but this was not always the case. When purchasing a new handle, it is essential to verify the dimensions.
Take the handle off. This can be done easily by turning the handle in the open position, and taking off two screws that keep the handle in place (which are usually concealed behind plastic caps that will need to removed). Once removed take a measurement from the base of the handle to the end of the spindle. This will provide you with the measurements required to purchase a replacement.
There are plenty of choices when it comes to choosing a new window handle from sleek chrome that blends in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail locks! The options are endless but the most important thing to do is select a style that is suitable for your home.
Espag handles are typically installed to uPVC window frames and are always the same size with a 43mm central. Cockspur handles vary from 58mm to 62mm but luckily there are replacements available for both sizes. Window handles from Cadenza are a different size since they have an angled blade that operates an interlocking mechanism that is multi-point inside the window.
When you are choosing a handle for your window, you should also consider the hand you use to open your door. Inline window handles aren't handed and can be used on right or left handed windows. Cranked window handles are handed and can only be used on windows that open in only one direction.
2. Remove the Handle
A window handle that is sagging can be a hassle, regardless of regardless of whether the handle is damaged or worn out. The good news is that you can repair a uPVC handle yourself. All you need is the most basic tools and some time to complete the job.
First of all, you have to open the window and make sure that it's in an unlocked position. Then, take off the screw caps holding the handle in place. After these have been removed, you are able working on removing the handle itself.
The handle is attached to a spindle within the window frame. This is either held in place by either a screw or pin dependent on the kind of handle. The most commonly used handles are the inline Espagnolette and cockspur handles. Both of these types of handles are used on casement windows, including aluminium windows. The handles can be locked with a key in order to stop unauthorised access from the outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you will need a flat-bladed screwdriver. Once this is released, the handle will fall off the spindle. Once the handle that was previously used has been removed, you'll have to measure the spindle length and make sure that the new handle will fit.
Once you have the right size, you can put the new handle in place. It is important to ensure that the handle is properly attached and rotates in the proper direction (clockwise when the handle is open or counterclockwise if the handle is closed). It is crucial to make sure that the handle hasn't been installed upside down.
Finally, you should replace the screw cap caps. Once you have done this, you can test the handle to make sure that it is working properly. Also, you should test the locking mechanism by moving the handle to the locked position and then returning it to the locked position.
3. Remove the Screws
A uPVC window handle is a crucial component of every home and is usually the first item to begin to show signs of wear and tear or damage. This can be caused by natural elements or by regular use, or malicious damage caused by opportunistic criminals who might wish to open a locked window and gain access to your home. A simple fix can resolve the issue and prevent it from repeating itself.
UPVC handles may also be difficult to open when the locking mechanism isn't functioning correctly. In most cases, the issue can be resolved by replacing the multipoint lock, rather than the entire handle and it's definitely worth a look since it can save you money.
After you've removed the old handle, you'll need to take off the screws that held it in place. These screws are usually found on the inside of the handle base. You may need to use an screwdriver to do this, and it's essential that you don't over tighten the screw as this could cause the handle to loosen.
Then, you'll need to locate the screws or pins that keep the handle in place. Again these are likely to be located on the inside face of the base of the handle and you'll need an screwdriver or a pair of pliers to remove the screws. After you have removed them, you'll need to replace the caps on the screws should you choose to do so and test the new handle to confirm that it's working properly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then, screw it into. If you're looking to replace the screw covers make sure that the handle is in a slack position and that the screws are securely secured. Then you can enjoy your newly installed window handle. We hope this will allow you to avoid the need for expensive window and door replacements in the future. Contact us if need more information about this or any other aspect of your uPVC window.
4. Install the new handle
The procedure of replacing a damaged window handle or updating it is simple and can be completed within just a few steps. Identifying the kind of window handle, measuring its spindle length and knowing what tools you'll need to finish the job are crucial. Always prioritise security when working with windows and tools. It is also essential to take your time and follow the steps to ensure you have a functioning handle that is safe to use.
To begin, find repairmywindowsanddoors.co.uk that hold your window handle. Take them off while firmly gripping the handle to stop it from falling down and causing injury. After the screws have been removed, they can be placed in a secure location to be replaced later.
After the handle that was used previously has been removed, you can now begin fitting your new handle. It is essential that the handle fits perfectly to ensure that it is functional and secures the window in its place. Next you need to slide the square metal bar attached to the handle into the hole for the window mechanism.
After your new handle is installed, the final thing to do is to replace the caps on the screws and test it to make sure it functions. If you aren't satisfied with the result or if your window doesn't open and close as it should, the next step is to call our experts who can help.
The majority of UK homes are equipped with uPVC Windows. This means that a lot of them will require replacement at some point due to wear and tear or breakage. Anyone with some DIY experience can easily accomplish the task. It is crucial that the handle you choose matches the size and style of the window. Contact us if you are unsure of the type of handle you need. They'll be able to guide you through the choices.